Are you ready to comply with the new mandatory IMO carriage requirement for Electronic Chart and Information Display (ECDIS)? Before 2018 most vessels are required to have installed and operate ECDIS. See below to check if your vessels are affected.
Electromed have recently been installing dual Martek Marine iECDIS solutions on commercial vessels in Europe and North Africa.
The Martek Marine iECDIS is constructed from heavy duty military spec spec. hardware. It is robust and built to last. Passive cooling systems use natural air circulation instead of electrical fans for cooling, extending lifetime and reducing breakdowns due to fan failure.
The iECDIS comes pre loaded with Jeppesen Charts so that you can start to navigate immediately. When full chart data base update is required on iECDIS it can be completed inside 10 minutes from one DVD as opposed to some systems which have a complicated update process using many discs. The iECDIS can can be connected to your vessels VSat or even an optional GSM modem so that all updates can be carried out automatically over the GSM network for a low flat monthly fee.
Contact Electromed today to ensure your new ECDIS is installed to and beyond minimum requirements. The following sensors must be connected to the ECDIS station as a minimum requirement.
Global Positioning System (GPS)
Speed through the water (Speed Log)
Ships Heading (Gyro Compass)
Electromed will ensure that your installation is completed in a professional manner as well as the mandatory interfaces the iECDIS can also be interfaced with the following equipment to ensure that you get the most from your ECDIS system
Wind Anemometer, Echo Sounder, Automatic Identification System (AIS), Autopilot, Secondary GPS, Voyage Data Recorder, Satellite Communications (DATA) , GSM (DATA)
Electromed are also authorised agents for the following ECDIS manufacturers;
Transas, Kelvin Hughes, Furuno, Martek, Tokyo Keiki.
Contact Electromed today for a free comprehensive quotation